What About a Timber Framed House?

Unlike traditional masonry construction, wooden house construction is light in weight which allows house envelope to heating up rapidly. In a house, where heating is intermittent, this fast response can cause increased comfort and energy saving. field shelters

And also carbon Neutral Timber

Timber is an all natural material and requires minimal energy to process it into construction materials. During its growth, wood absorbs carbon and stores the carbon in their cellular fibres. In the next burned up, or rots away, the wood releases several of carbon equal to the carbon it has already absorbed through its life time, thus so that it is carbon natural. 

Prefabricated Timber Panels

Premade timber houses are created as panels under stock conditions then transported to the internet site where the building is assembled. The systems are constructed with wood studding and composite wooden board materials, known as sheathing, which are pinned onto the exterior of the timber frame to form the rigid snowboard.


As well as its low thermal capacity, timber frame construction has several other advantages over masonry cavity walls. Mainly because the insulation is integrated within the thickness of the frame, a better thickness of insulation can be provided. An exterior wall cavity is not necessary in timber presented house construction, given that an appropriate vapour control level is incorporated on the warm side (in winter) of the insulation.

Better U-Values

Timber framed house construction can achieve U-values significantly better than the minimums required by current building standards. A typical timber studding wall involves a waterproof breather membrane layer, sheathing board, structural hardwood framing, vapour barrier and inner lining of plasterboard. Insulation is fitted involving the uprights of the hardwood frame, usually filling the total thickness of the exterior wall. Where higher than normal standards of efficiency are essential, a thicker exterior wall can be created.

External Wall Cladding

Exterior walls can be experienced with load bearing brickwork or cement rendered blockwork to give the appearance of conventional houses. Numerous lightweight cladding materials are also available including: tiling, slating, timber boarding, planks shingles, cement render on lathing, as well as proprietary rainscreen cladding alternatives.

Speed of Construction

Wood buildings can be created a lot more rapidly than brickwork cavity wall construction, as the timbers are minimize under quality manipulated manufacturer conditions. The absence of wet trades internally results in reduced becoming dried out time. Shorter time on site means a shortest total build programme.

Soundproof Houses and Insulation

The control of air infiltration is an essential factor in prefabricated houses, as this increases the cold weather performance and lowers working costs. If the held on to heat is lost through unwanted air leakage then there will be no benefit from high levels of insulation. Air firmness can be manipulated by tightly fitting structural energy with overlapped plasterboard linings, as well as by the vapour barrier that is located behind the wall panels.

Leave a Reply

Your email address will not be published. Required fields are marked *